|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Lenses do not fit all Cameras,
before ordering check that size and type is listed as an accessory on
Camera product Web Page.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||
| ¼" & 1/3" format | 2.1 mm focal length | F2.5 Board Lens | VIEW Image, Dimensions & data for this Security Camera Lens | |||
| ¼" & 1/3" format | 2.97 mm focal length | F2.0 Board Lens | VIEW Image, Dimensions & data for this CCTV Camera Lens | |||
| 1/5" format | 3 mm focal length | Board Lens with integral IR-CUT FILTER to suit IP-CCTV | |||
| ¼" & 1/3" format | 5.7 mm focal length | F2.0 Board Lens | VIEW Image, Dimensions & data for this Security Lens | |||
| ¼" & 1/3" format | 8 mm focal length | F2.0 Board Lens | VIEW Image, Dimensions & data for this CCTV Lens | |||
| ¼" & 1/3" format | 8 mm focal length | F2.0 High Resolution Board Lens for Sharper Images with 400 000 + Pixel &/or ¼" Sensors | VIEW Image, Dimensions & data for this Security Lens | |||
| ¼" & 1/3" format | 12 mm focal length | F2.0 Board Lens | VIEW Image, Dimensions & data for this CCTV Camera Lens | |||
| ¼", 1/3" & ½" format | 16.0 mm focal length | F2.0, Board Lens. | |||
| ¼" & 1/3" format | 25 mm focal length | F2.5 Board Lens | VIEW Image, Dimensions & data for this CCTV Security Camera Lens | |||
| ¼", 1/3" & ½" format | 50 mm focal length | F2.5 Board Lens | VIEW Image, Dimensions & data for this CCTV Security Camera Lens |
|
IR-CUT FILTER types may be used on
Day/Night Colour Cameras with a notch or no IR-Cut Filter to
improve Colour Rendition & Focus, more info
here |
| ¼" & 1/3" format | 3.7 mm F4.5 | M10 x 0.5 mm thread | Security Camera Pinhole Lens | |
| ¼" & 1/3" format | 3.7 mm F4.2 | 12 x 0.5 mm thread | Surveillance Camera Pinhole Lens | VIEW Image, Dimensions & data for this Security Lens |
|
|
| ¼" & 1/3" format C-Mount | 4 mm focal length | F2.0 | |
| ¼" & 1/3" format C-Mount | 6 mm focal length | F2.0 | VIEW Image, Dimensions & data for this Security CCTV Lens | |
| ¼" & 1/3" format CS-Mount | 6 mm focal length | F1.6 | |
| ¼" & 1/3" format C-Mount | 8 mm focal length | F2.0 | VIEW Image, Dimensions & data for this Security Lens | |
| ¼" & 1/3" format C-Mount | 16 mm focal length | F1.6 | |
| ¼" & 1/3" format CS-Mount | 25 mm focal length BL250 Board Lens with CS-BL Adaptor & Spring | |
| ¼", 1/3" & ½" format CS-Mount | 50 mm focal length BL500 Board Lens with CS-BL Adaptor & Spring |
|
|
| Japan Quality ¼" & 1/3" format CS-Mount | 8 mm focal length | F1.6 | |
| Japan Quality ¼" & 1/3" format CS-Mount | 6 ~ 18 mm Variable Focal Length | F1.2 |
|
|
| Japan Quality 1/3" format FAST F1.0 CS-Mount Automatic-Iris Megapixel Lens Network Camera Lens | 3 ~ 8 mm variable focal length | resolution @ center ~ 4 μm | VIEW Image & Dimensions for this Megapixel Security Lens | more | |
| Japan Quality 1/3" format Automatic Iris CS-Mount Megapixel Lens IP Camera | 5 ~ 50 mm variable focal length | F1.4 | resolution @ center ~ 4 μm | VIEW Dimensions & Image of this IP Megapixel Lens - Security Camera | more | |
| Japan Quality ½" format also suitable for 1/3" & ¼" Automatic Iris C-Mount IP Megapixel Camera Lens | 8 ~ 80 mm variable focal length | F1.6 | corrected for InfraRed focus shift for DayNite Cameras & IR Illumination | VIEW Image of this Megapixel Lens - IP Security CCTV Lens |
|
|
| Japan Quality ¼" or 1/3" format CS-Mount Camera Lens | 2.5 mm focal length | F1.6 |
|
|
| Japan Quality ¼" & 1/3" format CS-Mount AI lens | 2.7 ~ 12 mm Variable Focal Length | FAST F1.2 | corrected for InfraRed focus shift for DayNite Cameras & IR Illumination | VIEW Image of this CCTV Camera Lens | |
| ¼" & 1/3" format CS-Mount AI lens | 2.8 ~ 12 mm Variable Focal Length | F1.2 | VIEW Image of this Security Lens | |
| ¼" & 1/3" format CS-Mount AI lens | 3.5 ~ 8 mm Variable Focal Length | F1.6 | |
| Japan Quality ¼" & 1/3" format CS-Mount AI lens | 3 ~ 8 mm Variable Focal Length | FAST F0.95 | corrected for InfraRed focus shift designed for DayNite Cameras & IR Illumination | VIEW Image of this CCTV Video Lens | |
| Japan Quality ¼" & 1/3" format CS-Mount AI lens | 5 ~ 60 mm Variable Focal Length | F1.6 | VIEW Image of this Security Lens | |
| ¼" & 1/3" format CS-Mount AI lens | 6 ~ 60 mm Variable Focal Length | F1.6 | |
| ¼" & 1/3" format CS-Mount AI lens | 5 ~ 100 mm Variable Focal Length | F1.6 | VIEW Image of this CCTV Lens |
|
|
 Converts
a CS Mount Camera to C Mount, 1 inch x 32 TPI thread (style / colour
may vary depending on stocks).
C-SPACER/BP Bulk Pak 25 pieces
$99
subject to availability |
|
 Plastic
type pictured current stocks are Aluminium. CS Mount 1 inch x 32 TPI
thread to 12 mm x 0.5 mm Lens converter, allows most Board and some
Pinhole Lenses to be used on a CS Mount Camera. |
|
 Suits
all C and CS Mount Cameras with an Auto Iris Lens Output in this
Catalogue. Plug-AI//BP Bulk Pak 50 pieces $25 |
|
 Allows
a DC DRIVE Lens to be used on Cameras that only have Video Drive AI
Lens output. Common 4 Pin Input Plug & Output Socket, 8 ~ 16 VDC.
'LEVEL' (Image Signal Level) & 'A.L.C.' (Light Metering -
Average/Peak) adjustment Potentiometers. Compact ~ 33 mm x ~ 16 mm x
~ 10 mm, ~ 7 grams. Pin-Out - Plug (can be rewired) Camera: (1)
Positive, (2) NC, (3) Video Signal, (4) Gnd Negative. Socket Lens:
(1) Damp -, (2) Damp +, (3) Drive +, (4) Drive -. |
|
|
FILTERS for: experimental purposes |
|
| InfraRed PASS | |
Sheet of Optical Quality Long Pass
Material, passes light greater than ~ 670 nanometres wavelength.
Suitable for concealing Camera Lens or the LEDs in an IR Illuminator
(ILLUM-KIT)
or for construction of an Infra-Red Illuminator using an
incandescent lamp. Lightweight plastic, Thermoset ADC (CR-39),
transmission > 90%, 1-2% peak at 500 nanometres green colour.
Maximum operating temperature 100 degrees centigrade continuous (130
degrees one-hour). Thickness ~ 1.5 millimetres ~ 100 mm x ~ 125 mm.  |
|
| Infra-Red Pass Film 0.1 mm flexible, passes light greater than ~ 730 nanometres wavelength. Covers the rear element of most Board or Pinhole lenses or image area of a 1/3 inch sensor ~ 10 mm disc. | |
| Glass ~ 25 mm Square, ~ 3 mm Thick. Reflects Visible Spectrum (less than ~ 700 nm), Transmits/Passes Near Infrared Spectrum (greater than ~ 700 nm), to reduce heat in projection systems, etc etc. | |
| Glass ~ 65 mm x 60 mm, ~ 2 mm Thick. Reflects Visible Spectrum (less than ~ 700 nm), Transmits/Passes Near Infrared Spectrum (greater than ~ 700 nm), to reduce heat in projection systems, for Incandescent Infrared Illuminators, etc etc. | |
| Infra-Red CUT | |
| used, has some surface marks - Band-Pass Filter passes between ~ 320 ~ 620 nanometres, can also be used as a Short Pass filter with Cut-Off @ ~ 645 nm. Glass ~ 25 mm Diameter, ~ 3 mm Thick, Blue-Green Colour, Center Wavelength ~ 470 nm. | |
| used, virtually unmarked - Infra-Red CUT Filter passes light less than ~ 700 nanometres wavelength, Glass multi-layer ~ 25 mm Diameter on one side and ~ 17 mm Square on other, ~ 10 mm Thick, fitted in ~ 35 mm Diameter Rubber Mount. | |
| Glass ~ 65 mm x 60 mm, ~ 2 mm Thick. Reflects Visible Spectrum (less than ~ 700 nm), Transmits/Passes Near Infrared Spectrum (greater than ~ 700 nm), to reduce heat in projection systems, for Incandescent Infrared Illuminators, etc etc. | |
| Glass ~ 25 mm Square, ~ 3 mm Thick. Reflects Visible Spectrum (less than ~ 700 nm), Transmits/Passes Near Infrared Spectrum (greater than ~ 700 nm), to reduce heat in projection systems, etc etc. | |
| Mirror, Concave, First Surface, Gold Coated, Glass ~ 32 mm Diameter, ~ 5 mm Thick, ~ 25 mm Focal Length. | |
| Colour Temperature Correction | |
| Colour Temperature Correction Filter for 3600 degree Kelvin Fluorescent Lamps, Film ~ 0.1 mm, flexible. Covers the rear element of most Board or Pinhole lenses or image area of a 1/3 inch sensor ~ 10 mm disc. | |
| Colour Temperature Correction Filter for 4300 degree Kelvin Fluorescent Lamps, Film ~ 0.1 mm, flexible. Covers the rear element of most Board or Pinhole lenses or image area of a 1/3 inch sensor ~ 10 mm disc. | |
| Polarised | Extinction (crossed) ~ 0.4% - 0.5% |
| Covers the rear element of most Board or Pinhole lenses or image area of a 1/3 inch sensor ~ 10 mm flexible disc, ~ 0.25 mm thick, Grey tint, Transmission ~ 25%. | |
| 63 mm diameter, flexible disc, ~ 0.65 mm thick, Grey or Brown tint depending on stocks, Transmission: ~ 22% Brown, ~ 25% Grey. | |
'$5.00
Cutting Charge' plus $0.20
per cm² , minimum buy 25 cm² ($10)
Specify dimensions when ordering. Flexible Polarising Material
Cut-to-Size (rough cut) to cover the front element of a lens, for
window of an outdoor housing, etc., ~ 0.74 mm thick, Brown tint,
Transmission ~ 22%, Polarising Efficiency 99+%, UV Absorption 99+% |
|
| Colour Transparent Film | |
BOOK of 100, 82 mm x 38 mm sheets
most with a Spectral Transmission Graph. Coloured layer is sealed
between two microscopically thin layers of clear film using
tri-extrusion technology. Ideal for inspection and other
applications, often unseen details will be revealed depending on
light source, filter colour, etc. |
|
| PCB Lens Holders | Surplus clearance items for experimental purposes NO DIMENSIONAL OR OTHER INFORMATION AVAILABLE It may or may not be possible to adapt these to suit products in this catalogue. Holders may sometimes be attached directly to the IMAGE SENSOR IC with neutral cure silicone or other adhesive. |
Plastic PCB Lens Holder 12 mm x 0.5
mm thread for Pinhole Lens. |
|
Plastic PCB Lens Holder 10 mm x 0.5
mm thread for Pinhole Lens. |
|
Plastic PCB Lens Holder 13 mm x 1 mm
thread for Pinhole Lens. |
|
Aluminium PCB Lens Holder 10 mm x 0.5
mm thread for Pinhole Lens. |
|
|
Aluminium PCB Lens Holder 13 mm x 1
mm thread for Pinhole Lens. |
|
Metal PCB Module Swivel & Tilt Bracket to suit most
32 x 32 mm Modules, 4 x ~2mm screws, ~28 mm centers. Click Image to enlarge |
|
Metal PCB Module Swivel & Tilt
Bracket to suit most 32 x 32 mm & 42 x 42 mm Modules, 4 x ~2 mm
screws, ~6.5 mm standoffs, ~28 mm or ~38 mm centers. Click Image to enlarge |
|
|
|
