Infrared Light Emitting Diode
Illuminators - Ready-to-Use PCB
|
|
|
Range & Illumination level are
dependent on Power input, Lens Transmittance, Camera Spectral
Response/Sensitivity & overall characteristics of Lens/Image-Sensor/DSP/Filter
combination.
When Camera and
Illuminator are positioned at the same distance from subject
best results will be achieved by matching the 'Lens' Horizontal
Angle-of-View with the Illuminator Radiation Angle, multiple
Illuminators can be used to increase illumination level &/or
coverage.
more
|
|
Ready-to-Use
Plug-In LIGHT EMITTING DIODE INFRA-RED ILLUMINATOR for use with
Monochrome & InfraRed sensitive Day/Night Colour Cameras,
Automatic On/Off
Night/Day.
Sixty Seven 5 mm Light Emitting Diodes, ~ 850 nm
wavelength, ~ 15 degree radiation angle,
produces a visible
dull Red glow.
Main Spot Diameter ~ 0.6 metres @ 3 metres, illuminates ~ 75% of
the width-of-vision with a 1/3" Image Sensor & 16 mm Lens.
Power
Requirements: 12 Volts DC, ~ 150 milliamps, via 2.1 mm x 5.5 mm
DC Socket (center pin +) on ~ 1800 mm Cable. Mains Power
Supplies
here...
use
REG12/1A for Maximum Output & reliability.
Construction:
Aluminium alloy Case suitable for sheltered outdoor use under
eaves etc.
Dimensions: Main Body ~ 70 mm (Dia) x ~ 40 mm. Mass: Lamp ~ 390
grams, Bracket ~ 102 grams. |
Bracket included |
|
One Hundred &
Forty 5 mm Light Emitting Diodes, ~
940 nm
wavelength, ~ 60º
radiation angle,
invisible to the naked Eye.
Main Spot Diameter ~ 2.5 metres @ 3 metres, illuminates ~ 75% of
the width-of-vision with a 1/3" Image Sensor & 4.3 mm Lens.
Power
Requirements: 12 ~ 15 Volts DC, 100 ~ 600
milliamps, via 2.1 mm x 5.5 mm DC Socket (center pin = +) on ~
40 cm cable.
Mounting Brackets
click
here * Mains Power Supplies
here...
use
REG15/1.2A for Maximum Output.
Construction:
Plastic Case, LEDs & Control PCB are enclosed behind a clear
cover, not waterproof but suitable for sheltered outdoor use
under eaves etc. Mounting: 1/4" UNC female thread at rear and
compatible with
Mounting Brackets on
this page.
Dimensions: ~ 120
mm (W), ~ 160 mm (H), ~ 39 mm (D). Mass: ~ 260 grams. |
Covert Invisible to human eye
Bracket not included
|
|
One Hundred & Seven
8 mm Light
Emitting Diodes, ~ 850 nm wavelength, ~ 45 degree radiation
angle, produces a
visible dull Red glow.
Main Spot Diameter ~ 1.8 metres @ 3 metres, illuminates ~ 75% of
the width-of-vision with a 1/3" Image Sensor & 6 mm Lens.
Power
Requirements: 12 Volts DC, ~ 600 milliamps, via 2.1 mm x 5.5 mm
DC Socket (center pin +) on ~ 600 mm Cable that exits through
Mounting Bracket base. Mains Power Supplies
here...
use
REG12/1A for Maximum Output & reliability.
Construction:
Aluminium alloy Case suitable for sheltered outdoor use under
eaves etc.
Dimensions: ~ 150
mm (W), ~ 100 mm (H), ~ 202 mm (D) front to back with Bracket in
straight position. Mass: ~ 900 grams. |
Integral Bracket included |
|
Ready-to-Use Plug-In LIGHT
EMITTING DIODE INFRA-RED ILLUMINATOR for use with Monochrome &
InfraRed sensitive Day/Night Colour Cameras,
Automatic On/Off
Night/Day.
Eighty Three
Light Emitting Diodes, ~ 850 nm wavelength, ~ 80º
radiation angle,
produces a visible dull Red glow.
Main Spot Diameter ~ 3.6 metres @ 3 metres, illuminates ~ 75% of
the width-of-vision with a 1/3" Image Sensor & 2.9 mm Lens.
Power
Requirements: 12 Volts DC
or 24
volts ac, ~400 mA DC / ~250 mA ac. Mains Power Supplies
here....
use
REG12/1A or
PS24/2A for long cable runs.
Construction:
Aluminium Housing, suitable for sheltered outdoor use under
eaves etc.
Dimensions: Click on
drawing. Mass: ~ 880 grams,
Bracket ~ 150 grams. |
Mounting Bracket included
click here or on image to view full size |
|
Ready-to-Use 8 Watt Infrared
LIGHT EMITTING DIODE PCB IR Lamp for Monochrome & InfraRed
sensitive Day/Night colour Cameras.
Thirty Six
5 mm Infrared Light Emitting Diodes, ~ 850 nm wavelength, ~ 70º
radiation angle,
produces a visible dull Red glow.
Main Spot Diameter ~ 3 metres @ 3 metres, illuminates ~ 75% of
the width-of-vision with a 1/3" Image Sensor & 3.6 mm Lens.
*Power
Requirements: Up to 12 Volts DC, ~ 650 milliamps @ 12 Volts, 2.1
x 5.5 mm DC Socket (center pin = +) on ~ 300 mm cable. PCB ~ 75
x ~ 90 mm (can be 'cut' to 75 x 82), 50 mm 'Hole'. |
 |
|
discontinued
Cat Code:
IR-ILLUM/2 only $149 !
Ready-to-Use Super Infrared LED Illuminator for Monochrome &
InfraRed sensitive Day/Night Colour Cameras.
SEVEN
10 mm SUPER Light Emitting Infra Red Diodes, ~ 850 nm
wavelength, ~ 20º
radiation angle, produces a visible dull Red glow.
Main Spot
Diameter: ~ 1 metre @ 3 metres. Illuminates ~ 80% of
the width-of-vision with 1/3" Image Sensor & 12 mm Lens.
Range & Level-of-Illumination are affected by:
*Power-Input,
Lens Transmittance, Camera/Sensor Sensitivity & Spectral
Response.
Control:
Automatic On/Off Night/Day.
*Power
Requirements: 12 ~ 15 Volts DC, 80 ~ 310 milliamps via stripped
& tinned wires, ~ 750 mm Cable.
Mounting
Brackets click
here * Mains Power Supplies
here....
use
REG15/1.2A for Maximum Output.
Construction: Aluminium & Plastic, not waterproof but suitable
for sheltered outdoor use under eaves etc.
Mounting:
1/4" UNC female thread at bottom and compatible with
Camera Mounting Brackets. Dimensions:
~ 138 mm x ~ 145 mm, ~
850 grams.
|
 |
|
|
|
|
 |
discontinued
Cat
Code: IR-LEDkit/850
$49 - 'Kit'
52 mm
Diameter 50 LED Round Infrared Lamp Kit - PCB, LEDs, Housing &
Assembly Notes.
Wavelength / Angle: ~ 850 nm,
±7º (14º)
Max
Radiant Intensity: ~ 200 mW/sr @ Max 100 mA
Visibility @ Max current: Dull Red Glow
Forward
Voltage at Max Current for 5 LEDs in series = ~ 10.5 volts.
Main Spot
Diameter: ~ 0.74 metres @ 3 metres.
PCB
tracks are arranged as Five Groups of 10 series connected LEDs.
Interconnections may be rearranged to create Ten Groups of 5
series connected LEDs. Groups are paralleled and a series
resistor used to limit total current.
Construction of Five Group Lamp is straightforward. Ten
Group Lamp requires extra care as 25 LEDs are inserted
backwards. The edges of some LEDs may need to be filed.
It may
not be possible to operate Infra-Red LEDs continuously at Max
Current due to heat.
|
|
| |
|
|
discontinued
Cat
Code: IRLEDkit-940/20
$29 - 'Kit'
52 mm
Diameter 50 LED Round Infra Red Light Kit - PCB, LEDs, Housing &
Assembly Notes.
Wavelength / Angle: ~ 940 nm,
±10º (20º)
Max
Radiant Intensity: ~ 120 mW/sr @ Max 100 mA
Visibility @ Max current: Just perceptible.
Forward
Voltage at Max Current for 5 LEDs in series = ~ 7 volts.
Main Spot
Diameter: ~ 1.06 metres @ 3 metres.
PCB
tracks are arranged as Five Groups of 10 series connected LEDs.
Interconnections may be rearranged to create Ten Groups of 5
series connected LEDs. Groups are paralleled and a series
resistor used to limit total current.
Construction of Five Group Lamp is straightforward. Ten
Group Lamp requires extra care as 25 LEDs are inserted
backwards. The edges of some LEDs may need to be filed.
It may
not be possible to operate Infra-Red LEDs continuously at Max
Current due to heat.
|
|
|
|
|
|
discontinued
Cat
Code: IRLEDkit-940/40
$29 - 'Kit'
52 mm
Diameter 50 LED Round Infrared Lamp Kit - PCB, LEDs, Housing &
Assembly Notes.
Wavelength / Angle: ~ 940 nm,
±20º (40º)
Max
Radiant Intensity: ~ 90 mW/sr @ Max 100 mA
Visibility @ Max current: Just perceptible.
Forward
Voltage at Max Current for 5 LEDs in series = ~ 7 volts.
Main Spot
Diameter: ~ 2.1 metres @ 3 metres.
PCB
tracks are arranged as Five Groups of 10 series connected LEDs.
Interconnections may be rearranged to create Ten Groups of 5
series connected LEDs. Groups are paralleled and a series
resistor used to limit total current.
Construction of Five Group Lamp is straightforward. Ten
Group Lamp requires extra care as 25 LEDs are inserted
backwards. The edges of some LEDs may need to be filed.
It may
not be possible to operate Infra-Red LEDs continuously at Max
Current due to heat.
|
|
|
|
|
|
|
|
INFRA
RED LONG PASS FILTER SHEETS